1. From the EHSA Home Page, click "Equipment" on the top menu. 
  2. Click on "Meters" on the left hand menu under the "Equipment Heading" and then click on "Meters" directly under the bold-faced "Meters" heading.  This will take you to a table view of all of the radiation survey meters.
  3. Click "+Add"
  4. Enter the serial number of the meter body (not the detecting probe) in "Serial #"
  5. Select the units of measure of the analog or digital readout of the meter in "Meter Display"
  6. Select the manufacture in the "Make" field.
  7. Enter the meter model number in "Model"
  8. Select the building and lab where the meter is stored/used in "Buidling" and "Lab"
    • To determine which building and lab to use if it is not immediately known, look up the PI's permit and see which lab is attached to the RAM or X-Ray permit.  If it is not immediately obvious, ask a full-time ORS HP staff member.
  9. Under "Custodians" click the check box for "Search By PI/Permit" (if you are unsure of who the custodian is, ask a full-time ORS HP staff member).
    • Select the PI from the "PI" drop down list that appears
    • Select the RAM or X-Ray Permit from the "Permit #" drop down.
    • Find the name of the PI in the "Worker Name" list and click "Attach" by that name.
  10. Click "Save"