Accumulation containers are containers that you intend to use to collect waste. To conform to EPA rules, these containers should be labeled BEFORE waste is added.

 

  1. Click on “Waste” icon
    Click on “Waste” icon
  2. Click on "+Add a Waste Label" icon (left top corner), a new screen will pop out
    Click on "+Add a Waste Label" icon (left top corner), a new screen will pop out
  3. Fill out the form to the best of your knowledge. Do not guess - if you are not sure, leave an empty field. All red marked fields must be filled out. If it is possible, use a template (see separate instructions for creation and use of TEMPLATES.) Feel free to post comments in a "Comments" field. Double check your PI and lab room info.
    Fill out the form to the best of your knowledge. Do not guess - if you are not sure, leave an empty field. All red marked fields must be filled out. Feel free to post comments in a "Comments" field. Double check your PI and lab room info.
  4. If you have more than one container, click "Add Container".
    If you have more than one container, click "Add Container".
  5. Click on "Save" at the bottom of a page.
    Click on "Save" at the bottom of a page.
  6. Print your new waste label immediately and apply on your waste container. To print - go to "Haz Waste Label" green icon (first left column), a new tab or window (depending on your browser preferences) will show up. Print it and apply on your waste container immediately.
    Print your new waste label immediately and apply on your waste container. To print - go to "Haz Waste Label" green icon (first left column), a new tab or window (depending on your browser preferences) will show up. Print it and apply on your waste container immediately.