When a waste pickup notification has been received, ORS will go to the lab to pick up the waste.  The following are the steps to be completed before and after the waste pickup.  Processing a sealed source pickup request is different than other waste and is also detailed below.

Pre-Waste Pickup

  1. Click "EHSA".
  2. Click "Waste".
  3. Run the report "Form G" under the "RAM Waste Container Reports", using the waste tag ID number(s). Print the Form G(s) to take on the waste pickup.
  4. After returning to Boggs do the next steps.

Post-Waste Pickup

  1. Click "Process Waste Pickups" under "Waste Pickup Requests".
  2. Click "View In Lab Ram Containers".
  3. In the "Select" column click the check box next to each container that was picked up.
  4. Click the button "Mark as Picked-Up".
  5. A box will pop up to change the status of the container; select "ORS Waste Area"
  6. Click "Save".  This will take you back to the waste container view.
  7. Double-click the row for the waste container you just marked as picked up and changed the status to "ORS Waste Area".
  8. Change the "Storage Location" to "Building" Gilbert Hillhouse Boggs and "Location" B-7D.  Click "Save".
  9. Fill in the yellow waste tag on the container based on the information in the printed Form G.
  10. Ensure the waste container is physically placed in the waste room.
  11. File the hard copy Form G in the file folder in the drawer at the HP Tech desk in Boggs 3-60.